STEP 1: Download our FREE App!
STEP 2: Connect Bluetooth
Connect your Pedal Commander Unit via Bluetooth to the
Pedal Commander App on your phone.
By connecting your device to the pedal commander app you will automatically activate 2-year-warranty
STEP 3: Quick Start
Open The Pedal Commander App on your phone
1
allow notifications for important software updates
2
Click Connect And Start The Pairing Process Your Device
3
Click On Add Another Pedal Commander
4
Enter The Serial Number Located On The Back Of The Unit
5
choose a name for your device and GO!
6
Watch the video below to learn how
Installation
- Turn off Ignition.
- Keep your key fob (if applicable) at least 35 ft. (10m) away from your vehicle. This prevents your car from using power to transmit signals to your proximity key fob sensor.
- Leave your driver's door open for 15 minutes to allow your ECU to shut down completely.
- Locate and disconnect your accelerator pedal assembly plug.
- Plug in your Pedal Commander in line with your accelerator pedal assembly plug until you hear a “click.”
- Make sure the cables are tucked in place so they do not interfere with your driving experience.
- Place and mount the Pedal Commander to your desired location using the velcro and mounting bracket that's included in the box.
IMPORTANT
To avoid receiving check engine lights or other issues, it is important that you follow these instructions properly. Also, please ensure that you hear a “click” sound while connecting the plugs, as this signifies a secure connection.